1. Repeated construction is serious

The low level of duplication in the food and food packaging machinery industry refers to the repeated production of mechanical products that are low in cost, relatively backward in process, and easy to manufacture, regardless of industry development requirements. At present, China's food and food packaging machinery market is filled with mechanical products with low cost, relatively low level of technology and easy to manufacture. If such a market environment cannot be improved in the long run, it will not be conducive to the upgrading of products throughout the industry. There are no statistics on the specific and accurate data. About one-fourth of the enterprises in the industry currently have low-level repetitive production, and about 1,000 enterprises reproduce at low levels.

There are more than 100 automatic sealing machines in Wenzhou. There are still more enterprises in the production process. The production of thermal coding machines has been canceled by the state. The electric heating pancake machine is very primitive. However, there are still many food packaging machine manufacturers; despite the oil filtration and oil change problems, there are still manufacturers in the rural and small towns, and there are still some manufacturers of filling and capping machinery. Primary products are still in production; the production of comparative primary presses is continuing.

The main reasons for the low level of repetitive production are as follows: low-level products with low technological content, simple manufacturing process, and low investment required; the company's scientific research and innovation capabilities are seriously insufficient, and the speed of renewal is too slow; The new products were not protected in time for patent protection.

If this low level of repetition is not controlled, it will result in the continuous production of low-level and low-grade products, which will cause great waste of resources. At the same time, a large number of such products are flooding the market, and supply exceeds demand, causing chaos in the machinery market. Legitimate intellectual property rights are not effectively protected, hindering the continuous upgrading and innovation of industrial products, and ultimately hindering the development of the social economy.

2. Insufficient development capability

China's food and food packaging machinery is mainly imitation, mapping, and a little localization improvement, can not talk about development research. At present, domestic research and development investment is relatively small, and technical investment can account for 3% of sales revenue according to regulations, but most enterprises cannot. Our development methods are backward, and now a better company has carried out the “甩圖版工程”, but there are still very few real CAD applications. Product development lacks innovation and is difficult to level. Production methods are lagging behind, and most of them are processed with old general equipment. New product development is not only small, but also has a long development cycle. In enterprise management, it is often difficult to reproduce production, light research and development, and innovation. It is impossible to provide products in a timely manner in line with market demand. Most corporate technicians account for less than 10% of the total number of employees. Only a few companies can reach an annual output value of more than 50 million yuan.

3. Great gap with foreign products

China's food and food packaging machinery industry has achieved remarkable results in recent years, but there are still 20 years of technology gap compared with foreign products. Some of China's existing packaging machinery products are not high in technical content, and many advanced technologies have been applied to food packaging machinery in foreign countries, such as remote remote control technology (including monitoring), stepper motor technology, automatic flexible compensation technology, and laser cutting technology. , information processing technology, etc. Most of the domestic production is dominated by single machines, while most of the foreign countries are supporting production and rarely sell in a single machine. Product reliability is poor, technology update speed is slow, and new technologies, new processes, and new materials are used less. China's food and food packaging machinery has more single machines, fewer sets, more general-purpose models, and fewer equipments that meet special requirements and special materials. There are many products with low technical content, few products with high technology added value and high productivity; intelligent equipment is still in the development stage. The quality gap between China's food and food packaging machinery products is mainly reflected in poor stability and reliability, backward shape, rough appearance, short life of basic parts and accessories, short trouble-free operation time, short overhaul period, and most products are not yet available. Develop reliability standards. At present, only 5% of China's food and packaging machinery has reached the level of foreign countries in the 1990s, 20% reached the level of the 1980s, and 60% reached the level of the foreign 70s. Compared with industrial developed countries, China's food and packaging machinery products are 30%-40% less, and the technology level is 20-30 years behind.

4. Awareness of intellectual property is weak

China's food and food packaging machinery industry lacks intellectual property awareness, and does not apply for patent rights to protect new products developed by itself. It is often that a certain product of a company has just been developed and put on the market soon. Other companies will soon be copied. The same equipment product has been put on the market at the same time in thousands of enterprises in the short time. In the end, even no one can find it. Developers of equipment products; or developers who want to pursue the responsibility of other imitation manufacturers, and ultimately did not apply for intellectual property protection. The speed of upgrading the food and food packaging machinery products in China is too slow, and it can't keep up with the speed of low-level flat production. Many companies are busy expanding their market for existing products. They are busy copying and copying other people's equipment products, and do not consider how to upgrade mechanical products and how to achieve technological innovation.